(f)air tightness® OR - Airtight Sealant
(f)air tightness OR is a high-performance, permanently elastic airtight sealant designed for bonding airtightness membranes, vapour control layers and window sealing tapes to suitable construction substrates.
Based on a modified acrylate polymer dispersion, OR is particularly suitable for internal airtightness applications involving blockwork, concrete, steel and timber.
Once cured, the sealant forms a permanent elastic connection capable of accommodating the normal mechanical loads associated with airtightness applications in building construction.
A key advantage of OR is that additional mechanical support, such as a fixing or compression strip, is not required for standard applications. This allows straightforward installation of suitable membrane and tape connections without unnecessary additional components.
The sealant is orange for easy identification during installation and is available in 310 ml cartridges and 600 ml foil sausages.
PRODUCT BENEFITS
- High-performance sealant for airtight membrane and window tape connections.
- Forms a permanently elastic seal after curing.
- Designed primarily for internal airtightness applications.
- Suitable for bonding to compatible blockwork, concrete, steel and timber.
- No additional mechanical fixing strip required for standard applications.
- Airtightness tested according to DIN 4108-7.
- Durability of airtightness tested according to DIN 4108-11.
- Modified acrylate polymer dispersion formulation.
- EMICODE EC1 PLUS classification stated in the technical data sheet.
- Distinctive orange colour for easy identification.
- Available in 310 ml cartridges and 600 ml foil sausages.
APPLICATIONS & INSTALLATION GUIDANCE
Applications
(f)air tightness OR is primarily intended for bonding airtightness membranes and window sealing tapes to suitable construction substrates as part of a continuous internal airtightness layer.
Typical applications include membrane-to-wall connections, airtight junctions between membranes and compatible structural elements, and the bonding of suitable window sealing tapes to adjoining building substrates.
OR is a bonding and sealing product for airtightness applications. Its suitability for structural fixing, permanent external weather exposure or other specialist sealing applications must not be assumed.
Substrate Preparation
- Ensure the bonding substrate is stable and suitable for adhesive application.
- Remove dust, loose particles, grease and other contamination that could compromise adhesion.
- Check the condition of masonry, concrete, metal or timber surfaces before application.
- Avoid application to frozen or contaminated surfaces.
- Where substrate compatibility or adhesion is uncertain, carry out a suitable preliminary test.
Bonding Airtightness Membranes
OR can be used to form an airtight adhesive connection between suitable membranes and adjoining construction substrates.
- Identify the intended bonding line and ensure the membrane has sufficient material to accommodate the connection without excessive tension.
- Apply the sealant as a continuous bead using a suitable cartridge or foil sausage applicator.
- Position the membrane onto the fresh adhesive bead, ensuring continuous contact along the joint.
- Press the membrane carefully into the sealant without unnecessarily squeezing out the adhesive.
- Maintain an adequate adhesive layer to accommodate the substrate geometry and expected movement.
- Inspect the connection for gaps, interruptions or poorly bonded areas.
- Protect the connection against unnecessary loading and disturbance while the adhesive cures.
Bonding Window Sealing Tapes
OR may also be used to bond suitable window sealing tapes to compatible adjoining building substrates.
This can be useful where the tape is to be connected to blockwork, concrete or other suitable surfaces using a continuous adhesive bead.
- Ensure that the selected window sealing tape is suitable for bonding with a wet-applied adhesive.
- Prepare the substrate and tape bonding surfaces.
- Apply a continuous sealant bead along the intended connection.
- Position the tape accurately and press it into the fresh adhesive.
- Avoid excessive tension, wrinkles or interruptions in the adhesive connection.
- Check corners, overlaps and transitions carefully.
Elastic Connections and Mechanical Support
After curing, OR forms a permanently elastic seal that withstands normal mechanical loading associated with standard airtightness applications.
According to the technical data sheet, additional mechanical support, such as a fixing strip, is not required for standard applications.
Connections exposed to unusual movement, high mechanical loads or unsuitable substrate conditions require separate assessment. The sealant is not intended to replace structural fasteners or other load-bearing components.
Application Temperature
The technical data sheet specifies a processing temperature range of -5°C to +30°C, while expressly recommending a minimum processing temperature of +5°C.
For reliable site application, working at +5°C or above is therefore preferable. Substrate condition, moisture, frost and temperature must be considered before bonding.
- Do not apply to frozen or contaminated surfaces.
- Ensure materials are suitable for the prevailing application conditions.
- Take additional care in cold weather.
- Avoid disturbing the adhesive joint before adequate curing has taken place.
Curing and Joint Protection
OR develops its permanent elastic sealing properties after curing. Curing conditions will depend on the application, substrate and surrounding environment.
Protect fresh adhesive connections against displacement, excessive mechanical loads and adverse site conditions. The technical data sheet does not specify a universal curing time or fixed adhesive bead dimension.
Continuity of the Airtightness Layer
For effective airtightness, all membrane and tape connections must form a continuous sealing line. Particular attention should be paid to corners, changes of substrate, overlapping materials and transitions to adjoining construction elements.
Ensure that the chosen membrane, tape and substrate combination is suitable for the intended airtightness strategy.
Storage and Handling
The specified storage temperature range is +15°C to +25°C. Keep the product in its original packaging and protect it against unsuitable storage conditions.
The technical data sheet states that exposure to temperatures from -30°C to +35°C is possible during transport within usual transport times. This transport allowance must not be confused with the recommended storage or processing temperatures.
Health, Safety and Disposal
Follow normal construction-site safety practices and the applicable product safety information. Dispose of packaging and unused material in accordance with local regulations.
General Installation Note
Successful airtight sealing depends on suitable materials, substrate preparation, joint geometry, application conditions and workmanship. Check compatibility and carry out preliminary adhesion tests where necessary. The suitability of the complete construction detail must be assessed independently.
TECHNICAL DATA
| Property | Value |
|---|---|
| Airtightness | Passed – DIN 4108-7 |
| Durability of airtightness | Passed – DIN 4108-11 |
| Processing temperature | -5°C to +30°C* |
| Temperature resistance | -30°C to +80°C |
| Storage temperature | +15°C to +25°C** |
| Raw material | Modified acrylate polymer dispersion |
| EMICODE | EC1 PLUS (very low emission)*** |
| Density | 1.02 kg/litre |
| Colour | Orange |
| Available package sizes | 310 ml cartridge / 600 ml foil sausage |
* A minimum processing temperature of +5°C is highly recommended.
** During usual transport times, temperatures from -30°C to +35°C are permitted according to the technical data sheet.
*** Classification stated in the technical data sheet, version 04/2022.