(f)air tightness® GREEN Airtightness Tape
(f)air tightness GREEN is an adhesive tape designed for airtight sealing of membrane overlaps and joints in internal building envelope applications.
It provides an economical solution for sealing airtightness and vapour control membranes, helping to maintain the continuity of the airtight layer and reduce uncontrolled air leakage.
The tape uses an acrylic dispersion adhesive with high initial tack and a reinforced LDPE film carrier. It bonds to a range of common construction substrates, subject to suitable surface preparation and compatibility.
GREEN is intended for internal applications only. For connections requiring greater UV exposure resistance or external use, a suitable alternative such as (f)air tightness BLACK should be considered.
PRODUCT BENEFITS
- Economical airtightness tape for internal applications.
- Suitable for sealing overlaps and joints in airtightness and vapour control membranes.
- High initial tack and strong adhesive bonding performance.
- Reinforced LDPE film carrier with 100% elongation stated in the technical data sheet.
- Compatible with a wide range of suitable construction materials, including PE films, uPVC, metal, timber, plywood and OSB.
- Durable airtight bonding performance tested according to DIN 4108-11.
- EMICODE EC1 Plus classification stated in the technical data sheet.
- Practical 60 mm tape width for membrane overlaps and airtight connections.
APPLICATIONS & INSTALLATION GUIDANCE
Applications
(f)air tightness GREEN is intended for internal airtightness applications, particularly for sealing overlaps between vapour control membranes and airtightness membranes.
The tape may also be used for suitable airtight connections to PE films, uPVC, metal, timber and construction boards such as OSB and plywood. Substrate compatibility and adhesion must be verified for the intended application.
GREEN is not intended for permanent external exposure or applications requiring long-term weather and UV resistance.
Surface Preparation
- Ensure all bonding surfaces are clean, dry and free from dust, grease, frost and loose particles.
- Check the condition and stability of the substrate before applying the tape.
- Some porous, dusty or difficult substrates may require a suitable primer.
- Carry out an adhesion test where substrate suitability is uncertain.
Sealing Membrane Overlaps
- Position membrane overlaps so that a continuous adhesive bond can be achieved.
- Ensure that the underlying membrane is adequately supported during application.
- Apply GREEN tape centrally across the overlap wherever practical.
- Lay the tape smoothly and avoid folds, wrinkles or trapped air.
- Press the tape firmly over its entire bonded surface using a suitable application roller.
- Inspect all joints and repair discontinuities to maintain a continuous airtightness layer.
Connections to Other Building Materials
- GREEN may be used for appropriate airtight connections to compatible smooth and stable construction surfaces.
- Check the suitability of adhesion to timber, OSB, plywood, uPVC and metal surfaces before installation.
- For masonry, plaster or other porous substrates, evaluate whether primer or a different connection method is required.
- Avoid unsupported joints and continuous tensile or peeling loads on the adhesive bond.
- Allow for movement between adjacent building components where necessary.
Application Temperature
The specified processing temperature is +5°C to +35°C. Avoid applying the tape to wet, frozen or contaminated surfaces. The substrate and adhesive should be within the applicable processing temperature range.
Storage and Handling
Store the tape in its original packaging under dry conditions at +15°C to +25°C. The technical data sheet specifies a relative humidity range of 40% to 60% for storage.
Protect rolls against contamination, direct sunlight, excessive temperatures and mechanical damage during storage.
Health, Safety and Disposal
Use appropriate cutting tools and follow normal construction-site safety practices. Dispose of packaging and waste materials in accordance with applicable local regulations.
General Installation Note
The suitability of the adhesive tape depends on the substrate, surface preparation and application conditions. Carry out adhesion tests where required and protect the completed airtightness system against subsequent damage.
TECHNICAL DATA
| Property | Value |
|---|---|
| Product type | Adhesive tape for internal airtightness applications |
| Carrier material | Reinforced LDPE film |
| Adhesive | Acrylic dispersion |
| Colour | Green |
| Roll dimensions | 60 mm × 25 m |
| Durable airtight bonding | Passed – DIN 4108-11 |
| Reaction to fire | Class E – DIN EN 13501-1 |
| UV resistance | > 1 month (TDS) |
| GEV EMICODE | EC1 Plus (as stated in TDS) |
| Peel adhesion | > 35 N/25 mm |
| Elongation | 100% |
| Processing temperature | +5°C to +35°C |
| Temperature resistance | −40°C to +100°C |
| Storage temperature | +15°C to +25°C |
| Storage relative humidity | 40–60% |
| Resistance to condensation | High |
| Intended use | Internal applications only |