(f)air tightness® BLACK Airtightness Tape

(f)air tightness BLACK is a versatile, UV-resistant adhesive tape designed for airtight and windtight sealing of membrane overlaps, joints and suitable connections in the building envelope.

The tape is suitable for internal and external applications. Its reinforced LDPE film carrier and acrylic dispersion adhesive combine strong adhesion with high flexibility, allowing the tape to accommodate movement in suitable construction joints.

BLACK bonds to a wide range of construction materials, including airtightness and vapour control membranes, breathable membranes, PE films, uPVC, metal, timber, plywood and OSB. Substrates must be suitable and properly prepared; some surfaces may require a primer.

PRODUCT BENEFITS

  • Versatile airtightness tape for internal and external applications.
  • Suitable for sealing airtightness, vapour control and breathable membrane overlaps.
  • UV resistance of more than 24 months as stated in the technical data sheet.
  • High peel adhesion of at least 35 N/25 mm.
  • Reinforced LDPE film carrier with 300% elongation.
  • Durable airtight bonding performance tested according to DIN 4108-11.
  • Wide temperature resistance from -40°C to +100°C.
  • Compatible with various suitable construction substrates.
  • Suitable for demanding airtightness details where flexibility and reliable adhesion are required.

APPLICATIONS & INSTALLATION GUIDANCE

Applications

(f)air tightness BLACK is designed for airtight and windtight sealing applications in walls, ceilings, roofs and other suitable building envelope constructions.

Typical applications include sealing overlaps between airtightness membranes, vapour control layers and breathable membranes, as well as suitable connections to construction boards and other compatible materials.

Its UV resistance makes BLACK suitable for internal and external applications. The suitability of the tape for the complete joint, including weather exposure, movement and substrate conditions, must be assessed separately.

Surface Preparation

  • Ensure all bonding surfaces are clean, dry, stable and free from dust, grease, frost and loose particles.
  • Remove contamination that could reduce adhesive performance.
  • Check substrate compatibility before application.
  • Some porous, dusty or difficult substrates may require a suitable primer.
  • Carry out an adhesion test where substrate suitability is uncertain.

Sealing Membrane Overlaps

  • Arrange membrane overlaps to allow continuous and reliable adhesive sealing.
  • Ensure that the membrane and the underlying joint are adequately supported.
  • Apply BLACK centrally across the overlap wherever practical.
  • Lay the tape smoothly without unnecessary tension, folds or wrinkles.
  • Avoid trapped air and unsupported adhesive joints.
  • Press the tape firmly over its entire bonded surface using a suitable application roller.
  • Inspect completed joints and repair discontinuities to maintain airtightness.

Connections to Other Building Materials

  • BLACK may be used for suitable airtight and windtight connections to compatible uPVC, metal, timber, plywood and OSB surfaces.
  • Evaluate adhesion to each substrate and use primer where required.
  • Allow for movement between adjacent construction elements where necessary.
  • Avoid continuous peeling loads on the adhesive bond.
  • Provide adequate support where joints could otherwise be exposed to mechanical stress.

External Applications and UV Exposure

The technical data sheet specifies UV resistance of more than 24 months. This does not by itself establish that every taped construction joint is permanently weatherproof or suitable for unrestricted outdoor exposure.

External joints must be designed with consideration for water management, substrate compatibility, movement and the intended exposure conditions.

Application During Cold Weather

The specified processing temperature range is -10°C to +35°C. Applications below +5°C require particular care to ensure reliable adhesion.

  • Do not apply the tape to wet, icy or frozen substrates.
  • Ensure the bonding surface is suitable for adhesive application.
  • Condition cold materials where necessary and practical.
  • Press the tape firmly and check initial adhesion.
  • Carry out adhesion tests under challenging site conditions.

Storage and Handling

Store the tape in its original packaging under dry conditions at +15°C to +25°C. The technical data sheet specifies a relative humidity range of 40% to 60% for storage.

Protect rolls against contamination, excessive temperatures and mechanical damage.

Health, Safety and Disposal

Use appropriate cutting tools and follow normal construction-site safety practices. Dispose of packaging and waste materials in accordance with applicable local regulations.

General Installation Note

The suitability of the adhesive tape depends on the substrate, surface preparation, joint design and application conditions. Verify compatibility and carry out adhesion tests where required. Protect the completed airtightness system against subsequent damage.

TECHNICAL DATA

Property Value
Product type Airtightness & windtightness adhesive tape
Intended use Internal and external applications
Carrier material Reinforced LDPE film
Adhesive Acrylic dispersion
Colour Black
Roll dimensions 60 mm × 25 m
Durable airtight bonding Passed – DIN 4108-11
Reaction to fire Class E – DIN EN 13501-1
UV resistance > 24 months
GEV EMICODE Not available (n.a. in TDS)
Peel adhesion ≥ 35 N/25 mm
Elongation 300%
Processing temperature -10°C to +35°C*
Temperature resistance -40°C to +100°C
Storage temperature +15°C to +25°C
Storage relative humidity 40–60%
Resistance to condensation High

*Processing temperatures below +5°C require special care during application.

TECHNICAL DOCUMENTATION

specs Tape BLACK

PDF – 257.5 KB 4 downloads