(f)air tightness® SPLIT+ Corner Tape

(f)air tightness SPLIT PLUS is a self-adhesive corner sealing tape designed for creating airtight and windtight connections in the building envelope.

The tape features a grey spunbond non-woven carrier and a high-performance acrylic dispersion adhesive. Its 60 mm overall width incorporates a 15/45 mm split release liner, allowing the two adhesive sections to be exposed separately for accurate positioning and sealing.

SPLIT PLUS is suitable for internal and external applications, including connections between membranes, construction boards and other compatible building materials. Its split liner makes it particularly practical for corner junctions and connections around windows and doors.

The tape provides durable airtight bonding performance according to DIN 4108-11 and offers UV resistance of up to 3 months, as specified in the technical data sheet.

PRODUCT BENEFITS

  • Specially designed for airtight and windtight corner connections.
  • 60 mm overall width with 15/45 mm split release liner.
  • Separate liner sections allow accurate positioning and controlled bonding to adjoining surfaces.
  • Grey spunbond non-woven carrier with acrylic dispersion adhesive.
  • Suitable for internal and external applications.
  • Durable airtight bonding performance according to DIN 4108-11.
  • UV resistance of up to 3 months.
  • Suitable for bonding to compatible membranes, PE films, uPVC, metal, timber, plywood and OSB.
  • Flexible solution for corner details, window and door junctions and suitable timber frame connections.
  • Supplied in practical 25 m rolls.

APPLICATIONS & INSTALLATION GUIDANCE

Applications

(f)air tightness SPLIT PLUS is designed for airtight sealing of suitable corner junctions and connections between adjoining construction elements.

Typical applications include internal and external corners, window and door connections, timber frame junctions and airtight connections between building membranes and compatible construction surfaces.

The split release liner allows the tape to be positioned accurately before completing the adhesive connection to the adjoining surface.

Surface Preparation

  • Ensure bonding surfaces are clean, dry, stable and free from dust, grease, frost and loose particles.
  • Remove contamination that could reduce adhesive performance.
  • Check that membranes and construction boards are adequately supported.
  • Some porous, dusty or difficult substrates may require suitable primer treatment.
  • Carry out an adhesion test where substrate compatibility is uncertain.

Installing SPLIT PLUS at Corners

  • Measure the required tape length and allow sufficient material for continuous sealing.
  • Position the tape along the intended corner or construction junction.
  • Remove the first section of the split release liner and bond the exposed adhesive to the first surface.
  • Align the tape carefully and press the first bonded section firmly into place.
  • Remove the second release liner and bond the remaining tape width to the adjoining surface.
  • Press both bonded surfaces firmly using a suitable application roller.
  • Avoid wrinkles, trapped air, unsupported adhesive joints and unnecessary tension.
  • Inspect the completed connection for gaps or discontinuities.

Window and Door Connections

  • Ensure the window or door frame and adjoining substrate are suitable for adhesive bonding.
  • Clean and prepare the bonding areas before installation.
  • Use the split release liner to position the tape accurately along the frame or adjoining construction element.
  • Bond the remaining tape section to the adjacent substrate, maintaining a continuous airtight connection.
  • Allow for movement between adjoining construction elements where necessary.
  • Press the tape firmly and inspect corner transitions and overlaps.

Connections to Other Building Materials

SPLIT PLUS may be used for suitable connections to airtightness and vapour control membranes, breathable membranes, PE films, uPVC, metal, timber, plywood and OSB.

All substrates must be suitable for adhesive bonding. Some surfaces may require primer treatment to achieve reliable adhesion.

Avoid unsupported joints and continuous peeling loads on the adhesive connection. Provide suitable movement relief where required.

External Applications and UV Exposure

SPLIT PLUS is suitable for appropriate external applications. Its specified UV resistance is up to 3 months.

UV resistance does not automatically establish permanent weatherproofing of the complete connection. External joints must be designed with consideration for water management, substrate compatibility, movement and the intended exposure conditions.

Application During Cold Weather

The specified processing temperature range is -10°C to +50°C. Processing temperatures below +5°C require particular care during installation.

  • Do not apply the tape to wet, icy or frozen substrates.
  • Ensure the bonding surface is suitable for adhesive application.
  • Condition cold materials where necessary and practical.
  • Press the tape firmly over the entire bonded area.
  • Carry out adhesion tests under challenging site conditions.

Storage and Handling

Store SPLIT PLUS in its original packaging under dry conditions at +15°C to +25°C. The specified relative humidity range for storage is 40% to 60%.

Protect rolls against contamination, direct sunlight, excessive temperatures and mechanical damage.

Health, Safety and Disposal

Use suitable cutting tools and follow normal construction-site safety practices. Dispose of packaging and waste materials in accordance with applicable local regulations.

General Installation Note

The suitability of an adhesive connection depends on the substrate, surface preparation, joint design and application conditions. Verify compatibility and carry out adhesion tests where required. Protect the completed airtightness system against subsequent damage.

TECHNICAL DATA

Property Value
Durable airtight bonding performance Passed – DIN 4108-11
Reaction to fire Class E – DIN EN 13501-1
UV resistance Up to 3 months
Tensile strength 250 ± 30 N/25 mm
Nail tear resistance 140 ± 30 N/25 mm
Elongation 50% ± 15%
Processing temperature -10°C to +50°C*
Temperature resistance -40°C to +80°C
Storage temperature +15°C to +25°C**
Resistance to condensation Very good
Carrier Spunbond non-woven
Adhesive Acrylic dispersion
Colour Grey
Dimension per roll 60 mm (15/45 mm split) × 25 m

*Processing temperatures below +5°C require particular care during application.

**Recommended storage relative humidity: 40–60%.

TECHNICAL DOCUMENTATION

specs tape SPLIT PLUS

PDF – 395.3 KB 4 downloads