(f)air tightness® WISA OUT PLUS – External Window Tape

(f)air tightness WISA OUT PLUS is a fully self-adhesive external window sealing tape designed to provide weather protection around windows and doors on the outside of the building envelope.

Its distinguishing feature is a smooth, film-like outer surface that helps rainwater and moisture run off rather than remaining on a textured fleece surface. Unlike tapes intended for plaster integration, WISA OUT PLUS is not suitable for plastering or rendering over.

This makes WISA OUT PLUS particularly useful for external facade connections and construction details where a smooth, water-shedding surface is advantageous.

The tape has been tested for resistance to driving rain up to 1,200 Pa according to DIN EN 1027 and meets water resistance class W1, as stated in its technical data sheet. Its extended UV resistance of 9 months provides additional flexibility during construction.

With an approximate sd-value of 2 m, WISA OUT PLUS provides a more vapour-open external connection compared with the internal WISA IN tape.

PRODUCT BENEFITS

  • Smooth, water-shedding outer surface helps rainwater and moisture run off the tape.
  • Particularly suitable for consideration in facade and window connection details where surface water management is important.
  • Fully self-adhesive for bonding to suitable window frames and adjoining construction substrates.
  • Tested for resistance to driving rain up to 1,200 Pa according to DIN EN 1027.
  • Water resistance class W1 according to the technical data sheet.
  • Extended UV resistance of 9 months.
  • Approximate sd-value of 2 m.
  • Solvent-free acrylic dispersion adhesive.
  • Durable airtight bonding performance tested according to DIN 4108-11.
  • Suitable for appropriately designed residential and commercial facade connections.

APPLICATIONS & INSTALLATION GUIDANCE

External Window and Door Connections

WISA OUT PLUS is intended for weather protection at external window and door connections. The fully self-adhesive tape connects suitable frames to adjoining building substrates, helping to maintain continuity of the external sealing layer.

Facade Connections and Water-Shedding Details

The smooth, film-like outer surface makes WISA OUT PLUS particularly useful for facade connections and as part of a water-shedding layer beneath external window sills.

In these applications, the surface helps direct moisture towards the intended drainage path. The completed detail must provide continuous sealing at corners, overlaps, sill ends and adjoining construction elements, with a defined route for water to drain safely to the exterior.

Avoid standing water, reverse laps, unsupported joints and water accumulation behind the tape. The product's water resistance does not by itself establish the watertightness of the complete construction.

Surface Finish and Plaster Compatibility

WISA OUT PLUS is not intended to be plastered or rendered over. Its smooth outer surface is designed for weather-facing applications rather than integration into a plaster finish.

Where a window sealing tape must be incorporated into plaster or render, a suitable plaster-compatible tape and finishing system should be selected.

Surface Preparation

  • Ensure all bonding surfaces are clean, dry, stable and free from dust, grease, frost and loose particles.
  • Remove contamination that may reduce adhesive performance.
  • Check the condition and suitability of window frames and adjoining substrates.
  • Porous, dusty or difficult substrates may require suitable primer treatment.
  • Carry out adhesion tests where substrate suitability is uncertain.

Installing WISA OUT PLUS

  • Measure and cut the required tape length, allowing sufficient material for continuous connections and corner detailing.
  • Position the tape so it can bond securely to both the frame and adjoining construction substrate.
  • Remove the release liner progressively during application.
  • Apply the tape smoothly without wrinkles, unnecessary tension or trapped air.
  • Press the adhesive firmly against the prepared substrates using a suitable application roller.
  • Ensure all overlaps, corners and transitions form a continuous sealing layer.
  • Allow movement relief where differential movement between construction elements is expected.
  • Inspect the connection before subsequent construction work.

External Weather Protection

The technical data sheet specifies resistance to driving rain up to 1,200 Pa according to DIN EN 1027 and water resistance class W1.

These values describe tested product properties and do not automatically establish the performance of every completed construction joint.

UV Resistance

WISA OUT PLUS has a specified UV resistance of 9 months, compared with 3 months for standard WISA OUT.

UV resistance is not an approval for permanent unrestricted outdoor exposure. The intended exposure conditions and final facade construction must be considered.

Application Temperature

The specified application temperature range is +5°C to +40°C.

  • Do not apply to wet, icy or frozen substrates.
  • Ensure the adhesive and substrate are within the specified temperature range.
  • Protect exposed adhesive surfaces from contamination.
  • Press all bonded areas firmly into place.

Internal and External Sealing

WISA OUT PLUS is intended for the external side of appropriate window and door connections. Its approximate sd-value of 2 m is lower than the approximate 30 m sd-value of internal WISA IN.

Internal airtightness, external weather protection, vapour control and moisture management must be considered together in the complete connection design.

Storage and Handling

Store WISA OUT PLUS in its original packaging under clean, dry conditions at approximately 20°C and 50% relative humidity.

Protect rolls against contamination, direct sunlight, excessive temperatures and mechanical damage during storage.

Health, Safety and Disposal

Use suitable cutting tools and follow normal construction-site safety practices. Dispose of packaging and waste materials in accordance with applicable local regulations.

General Installation Note

The performance of an external window sealing connection depends on substrate compatibility, surface preparation, installation quality, joint design and exposure conditions. Verify suitability for the intended application and ensure that water can be safely directed away from the building fabric.

TECHNICAL DATA

Property Value
Air permeability Passed – DIN EN 12114
Durable airtight bonding performance Passed – DIN 4108-11
Reaction to fire Class E – DIN EN 13501
Vapour resistance (sd-value) Approx. 2 m – DIN EN 1931
Tensile strength – lengthwise 210 N/50 mm – DIN EN 12311
Tensile strength – crosswise 140 N/50 mm – DIN EN 12311
Resistance to driving rain 1,200 Pa – DIN EN 1027
Water resistance Class W1 – stated in TDS
Temperature resistance −40°C to +80°C
Application temperature +5°C to +40°C
UV resistance 9 months
Carrier material Smooth synthetic fleece
Adhesive Solvent-free acrylic dispersion
Colour Black
Standard roll dimensions 75 / 100 / 150 / 200 / 250 mm × 25 m (TDS)
Recommended storage Approx. 20°C, 50% relative humidity

TECHNICAL DOCUMENTATION

specs WISA OUT PLUS window tape

PDF – 141.2 KB 4 downloads