(f)air tightness® WISA OUT – External Window Tape
(f)air tightness WISA OUT is a fully self-adhesive external window sealing tape designed to provide weather protection at connections around windows and doors on the outside of the building envelope.
The tape combines a synthetic fleece carrier with a solvent-free acrylic dispersion adhesive. Its self-adhesive construction allows bonding to suitable window frames and adjoining building substrates without the need for a separate application adhesive.
WISA OUT has been tested for resistance to driving rain up to 1,200 Pa according to DIN EN 1027. The technical data sheet also specifies water resistance class W1.
With an approximate sd-value of 2 m, WISA OUT provides a more vapour-open external connection compared with the internal WISA IN tape, which has an approximate sd-value of 30 m.
Suitable substrates include blockwork, brick, concrete, plaster, metal, timber, plywood, OSB and uPVC, subject to appropriate surface preparation and adhesion.
PRODUCT BENEFITS
- Fully self-adhesive external window and door sealing tape.
- Designed for weather protection at external window and door connections.
- Tested for resistance to driving rain up to 1,200 Pa according to DIN EN 1027.
- Water resistance class W1 stated in the technical data sheet.
- Approximate sd-value of 2 m for a more vapour-open external connection.
- Solvent-free acrylic dispersion adhesive.
- Synthetic fleece carrier.
- Durable airtight bonding performance tested according to DIN 4108-11.
- UV resistance of 3 months according to the technical data sheet.
- Suitable for bonding to a wide range of properly prepared construction substrates.
- Available in different widths for suitable window and door connection details.
APPLICATIONS & INSTALLATION GUIDANCE
Applications
(f)air tightness WISA OUT is intended for external sealing of window and door connections in suitable residential and commercial building constructions.
The tape connects the external face of the window or door frame to the adjoining building substrate, helping to protect the connection against wind-driven rain and uncontrolled air movement.
WISA OUT is intended for the external side of the building envelope. The internal airtight connection should be formed using a suitable internal sealing system, such as (f)air tightness WISA IN, where appropriate for the construction.
Surface Preparation
- Ensure all bonding surfaces are clean, dry, stable and free from dust, grease, frost and loose particles.
- Remove contamination that could reduce adhesive bonding performance.
- Check the condition of the window or door frame and the adjoining construction substrate.
- Some porous, dusty or difficult substrates may require a suitable primer.
- Carry out adhesion tests where substrate compatibility is uncertain.
Installing WISA OUT on Window and Door Frames
- Measure the required tape length, allowing sufficient material for continuous sealing around the frame.
- Position the tape so that the intended bonding areas can connect continuously to the frame and adjoining external substrate.
- Remove the release liner progressively during installation.
- Apply the tape smoothly to the prepared frame surface, avoiding folds, wrinkles and unnecessary tension.
- Press the bonded area firmly using a suitable application roller.
- Maintain sufficient material for a reliable connection to the adjoining building element.
Connecting to Adjacent Building Elements
- Ensure the adjoining external substrate is suitable for adhesive bonding.
- Apply the remaining adhesive area continuously to the prepared substrate.
- Ensure full contact across the bonding surface, avoiding trapped air and unsupported adhesive areas.
- Press the tape firmly over the entire bonded area using a suitable application tool.
- Allow movement relief where differential movement between the frame and building structure is expected.
- Avoid continuous tensile or peeling loads on the bonded connection.
Corners and Frame Junctions
- Plan the installation sequence to create a continuous external sealing connection around the frame.
- Allow sufficient material at corners to accommodate the actual geometry without excessive tension.
- Ensure overlaps and junctions are continuously bonded.
- Press all corner connections firmly into place.
- Avoid wrinkles, gaps and unsupported folds.
- Inspect the completed connection before covering it with subsequent building layers.
Connections to Masonry, Plaster and Construction Boards
WISA OUT can be bonded to suitable substrates including blockwork, brick, concrete, plaster, timber, plywood, OSB, metal and uPVC.
Mineral and porous substrates must be sufficiently stable and free from loose particles. Depending on the surface condition, suitable primer treatment may be required to achieve reliable adhesion.
The compatibility of subsequent coatings, render, plaster or other finishing systems must be assessed separately.
External Weather Protection and Driving Rain
The technical data sheet specifies resistance to driving rain up to 1,200 Pa according to DIN EN 1027 and water resistance class W1.
These product properties do not by themselves establish the performance of every completed window or door connection. The joint design must account for water management, substrate compatibility, movement and the intended exposure conditions.
Particular attention should be given to corners, sill connections, overlaps and other areas where water could accumulate or penetrate behind the sealing layer.
UV Exposure
WISA OUT has a specified UV resistance of 3 months according to its technical data sheet.
Plan subsequent construction and finishing work so that exposure remains compatible with the product's specified resistance. Do not interpret this value as approval for permanently exposed external joints.
Application Temperature
The specified application temperature range is +5°C to +40°C.
- Do not apply WISA OUT to wet, icy or frozen surfaces.
- Ensure that the substrate and adhesive are within the recommended application temperature range.
- Protect adhesive surfaces against contamination during installation.
- Press all bonded areas firmly to ensure continuous contact.
- Carry out adhesion tests where site conditions are challenging.
Internal and External Window Sealing
WISA OUT is intended for the external side of window and door connections. Its approximate sd-value of 2 m makes it more vapour-open than WISA IN, which has an approximate sd-value of 30 m.
The complete joint arrangement must be appropriate for the intended construction, with due consideration for internal airtightness, external weather protection, moisture management and movement.
Storage and Handling
Store WISA OUT in its original packaging under clean, dry conditions. The technical data sheet recommends room temperature storage at approximately 20°C and 50% relative humidity.
Protect the tape against contamination, direct sunlight, excessive temperatures and mechanical damage during storage.
Health, Safety and Disposal
Use suitable cutting tools and follow normal construction-site safety practices. Dispose of packaging and waste materials in accordance with applicable local regulations.
General Installation Note
The performance of an external window sealing connection depends on the substrate, surface preparation, joint design and application conditions. Verify compatibility, carry out adhesion tests where required and protect the completed sealing system against subsequent damage.
TECHNICAL DATA
| Property | Value |
|---|---|
| Product type | Fully self-adhesive external window sealing tape |
| Air permeability | Passed – DIN EN 12114 (see TDS) |
| Durable airtight bonding performance | Passed – DIN 4108-11 |
| Reaction to fire | Class E – DIN EN 13501 |
| Vapour resistance (sd-value) | Approx. 2 m – DIN EN 1931 |
| Tensile strength – lengthwise | 210 N/50 mm – DIN EN 12311 |
| Tensile strength – crosswise | 140 N/50 mm – DIN EN 12311 |
| Resistance to driving rain | 1,200 Pa – DIN EN 1027 |
| Water resistance | Class W1 (stated in TDS) |
| Temperature resistance | −40°C to +80°C |
| Application temperature | +5°C to +40°C |
| UV resistance | 3 months |
| Carrier material | Synthetic fleece |
| Adhesive | Solvent-free acrylic dispersion |
| Colour | Black |
| Standard roll dimensions | 75 / 100 / 150 / 200 / 250 mm × 25 m (TDS) |
| Recommended storage conditions | Approx. 20°C, 50% relative humidity |